IT-kurs

Excelfunksjoner - elæringskurs [-]

Sopra Steria Akademiet er en del av Sopra Steria, og tilbyr kurs og opplæring innen: IT Service Management Prosjekt- og programstyring It-styring og kontroll Våre instruktører jobber til daglig som rådgivere innen disse områdene i Sopra Steria.  ITIL® 4 er det mest utbredte og anerkjente rammeverket for IT Service Management (ITSM) i verden, og ITIL® 4 Foundation er et introduksjonskurs til rammeverket. ITIL® 4 Foundation-sertifiseringen er designet som en introduksjon til ITIL® 4 og gjør det mulig for kandidater å se på IT-tjenestestyring gjennom en ende-til-ende-driftsmodell for oppretting, levering og kontinuerlig forbedring av teknisk aktiverte produkter og tjenester. Kurset avsluttes med en sertifiseringstest som gjennomføres etter at kurset er fullført. Sertifiseringen gjøres via en online-basert tjeneste via vår partner PeopleCert. Man velger selv tidspunkt for sertifiseringen. Kurset inkluderer: Kursdokumentasjon, sertifiseringstest og lunsj ved fysisk oppmøte   Kurset varer i 3 dager. Dag 1 og 2: 09:00-16:00. Dag 3: 09:00-13:00 Vi stiller med erfarne norske instruktører. Kursmateriell og eksamen er på engelsk. Eksamen varer i 75 minutter.  Det bør beregnes 6 timer til selvstudium. Du kan lese mere om ITIL her ITIL®/PRINCE2®/MSP®/MoP® are registered trademarks of AXELOS Limited, used under permission of AXELOS Limited. All rights reserved.   [-]

  Fleksible kurs for fremtidenNy kunnskap skal gi umiddelbar effekt, og samtidig være holdbar og bærekraftig på lang sikt. NTI AS har 30 års erfaring innen kurs og kompetanseheving, og utdanner årlig rundt 10.000 personer i Nord Europa innen CAD, BIM, industri, design og konstruksjon.     Revit MEP MagiCAD El Basis I   Her er et utvalg av temaene du vil lære på kurset: Introduksjon til BIM Link av Revit-modeller Koordinering av modeller Utarbeidelse av EL-installasjoner Snitt og detaljer Skjemaer og uttrekk til utprint   Dette er et populært kurs, meld deg på nå!   Tilpassete kurs for bedrifterVi vil at kundene våre skal være best på det de gjør - hele tiden.  Derfor tenker vi langsiktig om kompetanseutvikling og ser regelmessig kunnskapsløft som en naturlig del av en virksomhet. Vårt kurskonsept bygger på et moderne sett av ulike læringsmiljøer, som gjør det enkelt å finne riktig løsning uansett behov. Ta kontakt med oss på telefon 483 12 300, epost: salg@nticad.no eller les mer på www.nticad.no [-]

Understand the purpose and key concepts of Change Enablement, highlighting its importance in managing changes effectively to minimise risk and ensure business continuity.   This eLearning is: Interactive Self-paced   Device-friendly   2-3 hours of content   Mobile-optimised   Exam: 20 questions Multiple choise 30 minutes Closed book Minimum required score to pass: 65% [-]

Excelkurs Basis - elæringskurs [-]

Modern Application Architecture [-]

Power BI – Profesjonelle rapporter [-]

Power BI basis - elæringskurs [-]

Kurset fokuserer på integrering av forskjellige verdistrømmer og aktiviteter for å lage, levere og støtte IT-aktiverte produkter og tjenester, samtidig som den dekker støtte for praksis, metoder og verktøy. Kurset gir kandidatene forståelse for tjenestekvalitet og forbedringsmetoder. E-læringskurset inneholder 18 timer med undervisning, og er delt inn i 8 moduler. Les mer om ITIL® 4 på AXELOS sine websider. Inkluderer: Tilgang til ITIL® 4 Specialist: Create, Deliver and Support e-læring (engelsk) i 12 måneder. ITIL® 4 Specialist: Create, Deliver and Support online voucher til sertifiseringstest.  Du vil motta en e-post med tilgang til e-læringen, sertifiseringsvoucher og digital bok fra Peoplecert. Du avtaler tid for sertifiseringen som beskrevet i e-posten fra Peoplecert. ITIL®/PRINCE2®/MSP®/MoP® are registered trademarks of AXELOS Limited, used under permission of AXELOS Limited. All rights reserved. [-]

Students will learn how to plan for DevOps, use source control, scale Git for an enterprise, consolidate artifacts, design a dependency management strategy, manage secrets, implement continuous integration, implement a container build strategy, design a release strategy, set up a release management workflow, implement a deployment pattern, and optimize feedback mechanisms TARGET AUDIENCE Students in this course are interested in designing and implementing DevOps processes or in passing the Microsoft Azure DevOps Solutions certification exam. COURSE OBJECTIVES Plan for the transformation with shared goals and timelines Select a project and identify project metrics and Key Performance Indicators (KPI's) Create a team and agile organizational structure Design a tool integration strategy Design a license management strategy (e.g., Azure DevOps and GitHub users) Design a strategy for end-to-end traceability from work items to working software Design an authentication and access strategy Design a strategy for integrating on-premises and cloud resources Describe the benefits of using Source Control Describe Azure Repos and GitHub Migrate from TFVC to Git Manage code quality, including technical debt SonarCloud, and other tooling solutions Build organizational knowledge on code quality Explain how to structure Git repos Describe Git branching workflows Leverage pull requests for collaboration and code reviews Leverage Git hooks for automation Use Git to foster inner source across the organization Explain the role of Azure Pipelines and its components Configure Agents for use in Azure Pipelines Explain why continuous integration matters Implement continuous integration using Azure Pipelines Design processes to measure end-user satisfaction and analyze user feedback Design processes to automate application analytics Manage alerts and reduce meaningless and non-actionable alerts Carry out blameless retrospectives and create a just culture Define an infrastructure and configuration strategy and appropriate toolset for a release pipeline and application infrastructure Implement compliance and security in your application infrastructure Describe the potential challenges with integrating open-source software Inspect open-source software packages for security and license compliance Manage organizational security and compliance policies Integrate license and vulnerability scans into build and deployment pipelines Configure build pipelines to access package security and license ratings   COURSE CONTENT Module 1: Get started on a DevOps transformation journey Module 1 Lessons Introduction to DevOps Choose the right project Describe team structures Choose the DevOps tools Plan Agile with GitHub Projects and Azure Boards Introduction to source control Describe types of source control systems Work with Azure Repos and GitHub Lab 1: Agile planning and portfolio management with Azure Boards   Lab 2: Version controlling with Git in Azure Repos   After completing Module 1, students will be able to: Understand what DevOps is and the steps to accomplish it Identify teams to implement the process Plan for the transformation with shared goals and timelines Plan and define timelines for goals Understand different projects and systems to guide the journey Select a project to start the DevOps transformation Identify groups to minimize initial resistance Identify project metrics and Key Performance Indicators (KPI's) Understand agile practices and principles of agile development Create a team and agile organizational structure Module 2: Development for enterprise DevOps Module 2 Lessons Structure your Git Repo Manage Git branches and workflows Collaborate with pull requests in Azure Repos Explore Git hooks Plan foster inner source Manage Git repositories Identify technical debt Lab 3: Version controlling with Git in Azure Repos   After completing Module 2, students will be able to: Understand Git repositories Implement mono repo or multiple repos Explain how to structure Git Repos Implement a change log Describe Git branching workflows Implement feature branches Implement GitFlow Fork a repo Leverage pull requests for collaboration and code reviews Give feedback using pull requests Module 3: Implement CI with Azure Pipelines and GitHub Actions Module 3 Lessons Explore Azure Pipelines Manage Azure Pipeline agents and pools Describe pipelines and concurrency Explore Continuous integration Implement a pipeline strategy Integrate with Azure Pipelines Introduction to GitHub Actions Learn continuous integration with GitHub Actions Design a container build strategy Lab 4: Configuring agent pools and understanding pipeline styles   Lab 5: Enabling continuous integration with Azure Pipelines   Lab 6: Integrating external source control with Azure Pipelines   Lab 7: Implementing GitHub Actions by using DevOps Starter   Lab 8: Deploying Docker Containers to Azure App Service web apps   After completing Module 3, students will be able to: Describe Azure Pipelines Explain the role of Azure Pipelines and its components Decide Pipeline automation responsibility Understand Azure Pipeline key terms Choose between Microsoft-hosted and self-hosted agents Install and configure Azure pipelines Agents Configure agent pools Make the agents and pools secure Use and estimate parallel jobs Module 4: Design and implement a release strategy Module 4 Lessons Introduction to continuous delivery Create a release pipeline Explore release strategy recommendations Provision and test environments Manage and modularize tasks and templates Automate inspection of health Lab 9: Creating a release dashboard   Lab 10: Controlling deployments using Release Gates   After completing Module 4, students will be able to: Explain continuous delivery (CD) Implement continuous delivery in your development cycle Understand releases and deployment Identify project opportunities to apply CD Explain things to consider when designing your release strategy Define the components of a release pipeline and use artifact sources Create a release approval plan Implement release gates Differentiate between a release and a deployment Module 5: Implement a secure continuous deployment using Azure Pipelines Module 5 Lessons Introduction to deployment patterns Implement blue-green deployment and feature toggles Implement canary releases and dark launching Implement A/B testing and progressive exposure deployment Integrate with identity management systems Manage application configuration data Lab 11: Configuring pipelines as code with YAML   Lab 12: Setting up and running functional tests   Lab 13: Integrating Azure Key Vault with Azure DevOps   After completing Module 5, students will be able to: Explain the terminology used in Azure DevOps and other Release Management Tooling Describe what a Build and Release task is, what it can do, and some available deployment tasks Implement release jobs Differentiate between multi-agent and multi-configuration release job Provision and configure target environment Deploy to an environment securely using a service connection Configure functional test automation and run availability tests Setup test infrastructure Use and manage task and variable groups Module 6: Manage infrastructure as code using Azure and DSC Module 6 Lessons Explore infrastructure as code and configuration management Create Azure resources using Azure Resource Manager templates Create Azure resources by using Azure CLI Explore Azure Automation with DevOps Implement Desired State Configuration (DSC) Implement Bicep Lab 14: Azure deployments using Azure Resource Manager templates   After completing Module 6, students will be able to: Understand how to deploy your environment Plan your environment configuration Choose between imperative versus declarative configuration Explain idempotent configuration Create Azure resources using ARM templates Understand ARM templates and template components Manage dependencies and secrets in templates Organize and modularize templates Create Azure resources using Azure CLI Module 7: Implement security and validate code bases for compliance Module 7 Lessons Introduction to Secure DevOps Implement open-source software Software Composition Analysis Static analyzers OWASP and Dynamic Analyzers Security Monitoring and Governance Lab 15: Implement security and compliance in Azure Pipelines   Lab 16: Managing technical debt with SonarQube and Azure DevOps   After completing Module 7, students will be able to: Identify SQL injection attack Understand DevSecOps Implement pipeline security Understand threat modeling Implement open-source software Explain corporate concerns for open-source components Describe open-source licenses Understand the license implications and ratings Work with Static and Dynamic Analyzers Configure Microsoft Defender for Cloud Module 8: Design and implement a dependency management strategy Module 8 Lessons Explore package dependencies Understand package management Migrate, consolidate, and secure artifacts Implement a versioning strategy Introduction to GitHub Packages Lab 17: Package management with Azure Artifacts   After completing Module 8, students will be able to: Define dependency management strategy Identify dependencies Describe elements and componentization of a dependency management Scan your codebase for dependencies Implement package management Manage package feed Consume and create packages Publish packages Identify artifact repositories Migrate and integrate artifact repositories Module 9: Implement continuous feedback Module 9 Lessons Implement tools to track usage and flow Develop monitor and status dashboards Share knowledge within teams Design processes to automate application analytics Manage alerts, Blameless retrospectives and a just culture Lab 18: Monitoring application performance with Application Insights   Lab 19: Integration between Azure DevOps and Microsoft Teams   Lab 20: Sharing Team Knowledge using Azure Project Wikis   After completing Module 9, students will be able to: Implement tools to track feedback Plan for continuous monitoring Implement Application Insights Use Kusto Query Language (KQL) Implement routing for mobile applications Configure App Center Diagnostics Configure alerts Create a bug tracker Configure Azure Dashboards Work with View Designer in Azure Monitor [-]

This course is ideal for individuals or teams who wish to build a solid understanding of ArchiMate 3 and develop architecture artifacts using ArchiMate. What's new in ArchiMate 3.0? Like ArchiMate 2, ArchiMate 3 is a comprehensive modeling language that allows architects to create commonly understood and integrated visualizations of the essential enterprise architecture domains. Published as an Open Group Standard in June 2016, the ArchiMate 3 specification is a major update to ArchiMate 2.1. New features in version 3 include:• New concepts - Strategy and Motivation• New entities – Application, Technology and Implementation layers• Better ways to connect planning with implementation• Improvements in cross-layer relationships• New ‘Physical’ layer• Improvements in the viewpoints definition mechanism   Examination Certification in ArchiMate requires you to pass both a Foundation exam and a Certified exam.The Foundation exam is a closed book, multiple choice exam consisting of 40 questions. There is a time limit of 60 minutes and the pass-rate is 60%.After passing the Foundation exam you can then move onto the Practitioner exam, which is an open book, multiple choice exam consisting of eight questions. There is a time limit of 90 minutes and the pass-rate is 70%.A number of exercises are interspersed throughout the course, which are aimed at testing your understanding and practical application of the training you have just received. At the end of the course, a number of mock-exam case study scenarios are provided which have been designed to simulate the actual exam.After passing both exams you will become a certified ArchiMate 3 Practitioner! [-]

COURSE OVERVIEW  Learn how to implement security principles within an enterprise network and how to overlay network design by using solutions such as SD-Access and SD-WAN. The automation and programmability of Enterprise networks is also incorporated in this course. This course will help you: Configure, troubleshoot, and manage enterprise wired and wireless networks Implement security principles within an enterprise network Earn 64 CE credits toward recertification   Please note that this course is a combination of Instructor-Led and Self-Paced Study - 5 days in the classroom and approx. 3 days of self study. The self-study content will be provided as part of the digital courseware that you receive at the beginning of the course and should be part of your preparation for the exam. Additional lab access will be provided at the end of the class, this will be valid for 60 hours or 90 days whichever is the shorter. It will be possible to complete all but 7 of the labs after the class. TARGET AUDIENCE Network engineers involved in the installation, support and troubleshooting of enterprise networks. COURSE OBJECTIVES After completing this course you should be able to: Illustrate the hierarchical network design model and architecture using the access, distribution, and core layers Compare and contrast the various hardware and software switching mechanisms and operation, while defining the Ternary Content Addressable Memory (TCAM) and Content Addressable Memory (CAM), along with process switching, fast switching, and Cisco Express Forwarding concepts Troubleshoot Layer 2 connectivity using VLANs and trunking Implementation of redundant switched networks using Spanning Tree Protocol Troubleshooting link aggregation using EtherChannel Describe the features, metrics, and path selection concepts of Enhanced Interior Gateway Routing Protocol (EIGRP) Implementation and optimization of Open Shortest Path First (OSPF)v2 and OSPFv3, including adjacencies, packet types, and areas, summarization, and route filtering for IPv4 and IPv6 Implementing External Border Gateway Protocol (EBGP) interdomain routing, path selection, and single and dual-homed networking Implementing network redundancy using protocols including Hot Standby Routing Protocol (HSRP) and Virtual Router Redundancy Protocol (VRRP) Implementing internet connectivity within Enterprise using static and dynamic Network Address Translation (NAT) Describe the virtualization technology of servers, switches, and the various network devices and components Implementing overlay technologies such as Virtual Routing and Forwarding (VRF), Generic Routing Encapsulation (GRE), VPN, and Location Identifier Separation Protocol (LISP) Describe the components and concepts of wireless networking including Radio Frequency (RF) and antenna characteristics, and define the specific wireless standards Describe the various wireless deployment models available, include autonomous Access Point (AP) deployments and cloud-based designs within the centralized Cisco Wireless LAN Controller (WLC) architecture Describe wireless roaming and location services Describe how APs communicate with WLCs to obtain software, configurations, and centralized management Configure and verify Extensible Authentication Protocol (EAP), WebAuth, and Pre-shared Key (PSK) wireless client authentication on a WLC Troubleshoot wireless client connectivity issues using various available tools Troubleshooting Enterprise networks using services such as Network Time Protocol (NTP), Simple Network Management Protocol (SNMP), Cisco Internetwork Operating System (Cisco IOS®) IP Service Level Agreements (SLAs), NetFlow, and Cisco IOS Embedded Event Manager Explain the use of available network analysis and troubleshooting tools, which include show and debug commands, as well as best practices in troubleshooting Configure secure administrative access for Cisco IOS devices using the Command-Line Interface (CLI) access, Role-Based Access Control (RBAC), Access Control List (ACL), and Secure Shell (SSH), and explore device hardening concepts to secure devices from less secure applications, such as Telnet and HTTP Implement scalable administration using Authentication, Authorization, and Accounting (AAA) and the local database, while exploring the features and benefits Describe the enterprise network security architecture, including the purpose and function of VPNs, content security, logging, endpoint security, personal firewalls, and other security features Explain the purpose, function, features, and workflow of Cisco DNA Centre™ Assurance for Intent-Based Networking, for network visibility, proactive monitoring, and application experience Describe the components and features of the Cisco SD-Access solution, including the nodes, fabric control plane, and data plane, while illustrating the purpose and function of the Virtual Extensible LAN (VXLAN) gateways Define the components and features of Cisco SD-WAN solutions, including the orchestration plane, management plane, control plane, and data plane Describe the concepts, purpose, and features of multicast protocols, including Internet Group Management Protocol (IGMP) v2/v3, Protocol-Independent Multicast (PIM) dense mode/sparse mode, and rendezvous points Describe the concepts and features of Quality of Service (QoS), and describe the need within the enterprise network Explain basic Python components and conditionals with script writing and analysis Describe network programmability protocols such as Network Configuration Protocol (NETCONF) and RESTCONF Describe APIs in Cisco DNA Centre and vManage COURSE CONTENT Examining Cisco Enterprise Network Architecture Cisco Enterprise Architecture Model Campus LAN Design Fundamentals Traditional Multilayer Campus Layer Design Campus Distribution Layer Design   Understanding Cisco Switching Paths Layer 2 Switch Operation Control and Data Plane Cisco Switching Mechanisms Implementing Campus LAN Connectivity Revisiting VLANs Trunking with 802.1Q Inter-VLAN Routing Building Redundant Switched Topology Spanning-Tree Protocol Overview Spanning-Tree Protocol Operation Spanning-Tree Protocols Types and Features Multiple Spanning Tree Protocol PortFast and BPDU Implementing Layer 2 Port Aggregation (Self-Study) Need for EtherChannel EtherChannel Mode Interactions Layer 2 EtherChannel Configuration Guidelines EtherChannel Load-Balancing Options Troubleshoot EtherChannel Issues Understanding EIGRP EIGRP Features EIGRP Reliable Transport Establishing EIGRP Neighbour Adjacency EIGRP Metrics EIGRP Path Selection Explore EIGRP Path Selection Explore EIGRP Load Balancing and Sharing EIGRP for IPv6 Compare EIGRP and OSPF Routing Protocols Implementing OSPF Describe OSPF The OSPF Process OSPF Neighbour Adjacencies Building a Link-State Database OSPF LSA Types Compare Single-Area and Multi-Area OSPF OSPF Area Structure OSPF Network Types Optimizing OSPF OSPF Cost OSPF Route Summarization Benefits OSPF Route Filtering Tools Compare OSPFv2 and OSPFv3 Exploring EBGP Interdomain Routing with BGP BGP Operations Types of BGP Neighbour Relationships BGP Path Selection BGP Path Attributes Implementing Network Redundancy Need for Default Gateway Redundancy Define FHRP HSRP Advanced Features Cisco Switch High Availability Features Implementing NAT Define Network Address Translation NAT Address Types Explore NAT Implementations NAT Virtual Interface Introducing Virtualisation Protocols and Techniques Server Virtualisation Need for Network Virtualisation Path Isolation Overview Introducing VRF Introducing Generic Routing Encapsulation Introducing Virtualisation Protocols and Techniques Server Virualization Need for Network Virtualisation Path Isolation Overview Introducing VRF Introducing Generic Routing Encapsulation Understanding Virtual Private Networks and Interfaces Site-to-Site VPN Technologies IPSec VPN Overview IPSec: IKE IPsec Modes IPsec VPN Types Cisco IOS VTI Understanding Wireless Principles Explain RF Principles Describe Watts and Decibels Describe Antenna Characteristics Describe IEEE Wireless Standards Identify Wireless Component Roles Examining Wireless Deployment Options Wireless Deployment Overview Describe Autonomous AP Deployment Describe Centralized Cisco WLC Deployment Describe FlexConnect Deployment Cloud Deployment and Its Effect on Enterprise Networks Describe the Cloud-Managed Meraki Solution Cisco Catalyst 9800 Series Controller Deployment Options Describe Cisco Mobility Express Understanding Wireless Roaming and Location Services Wireless Roaming Overview Mobility Groups and Domains Wireless Roaming Types Describe Location Services Examining Wireless AP Operation Universal AP Priming Explore the Controller Discovery Process Describe AP Failover Explain High Availability Explore AP Modes Understanding Wireless Client Authentication Authentication Methods Pre-Shared Key (PSK) Authentication 802.1X User Authentication Overview PKI and 802.1X Certificate Based Authentication Introduction to Extensible Authentication Protocol EAP-Transport Layer Security (EAP-TLS) Protected Extensible Authentication Protocol EAP-FAST Guest Access with Web Auth Troubleshooting Wireless Client Connectivity Wireless Troubleshooting Tools Overview Spectrum Analysis Wi-Fi Scanning Packet Analysis Cisco AireOS GUI and CLI Tools Cisco Wireless Config Analyzer Express Common Wireless Client Connectivity Issues Overview Client to AP Connectivity WLAN Configuration Infrastructure Configuration Introducing Multicast Protocols (Self-study) Multicast Overview Internet Group Management Protocol Multicast Distribution Trees IP Multicasting Routing Rendezvous Point Introducing QoS (Self-study) Understand the Impact of User Applications on the Network Need for Quality of Service (QoS) Describe QoS Mechanisms Define and Interpret a QoS Policy Implementing Network Services Understanding Network Time Protocol Logging Services Simple Network Management Protocol Introducing NetFlow Flexible NetFlow Understanding Cisco IOS Embedded Event Manager Using Network Analysis Tools Troubleshooting Concepts Network Troubleshooting Procedures: Overview Network Troubleshooting Procedures: Case Study Basic Hardware Diagnostics Filtered Show Commands Cisco IOS IP SLAs Switched Port Analyzer(SPAN) Overview Remote SPAN (RSPAN) Encapsulated Remote Switched Port Analyzer(ERSAPN) Cisco Packet Capture Tools Overview Implementing Infrastructure Security ACL Overview ACL Wildcard Masking Types of ACLs Configure Numbered Access Lists Use ACLs to Filter Network Traffic Apply ACLs to Interfaces Configured Named Access Lists Control Plane Overview Control Plane Policing Implementing Secure Access Control Securing Device Access AAA Framework Overview Benefits of AAA Usage Authentication Options RADIUS and TACACS+ Enabling AAA and Configuring a Local User for Fallback Configuring RADIUS for Console and VTY Access Configuring TACACS+ for Console and VTY Access Configure Authorization and Accounting Understanding Enterprise Network Security Architecture (Self-study) Explore Threatscape Cisco Intrusion Prevention Systems Virtual Private Networks Content Security Logging Endpoint Security Personal Firewalls Antivirus and Antispyware Centralized Endpoint Policy Enforcement Cisco AMP for Endpoints Firewall Concepts TrustSec MACsec Identity Management 802.1X for Wired and Wireless Endpoint Authentication MAC Authentication Bypass Web Authentication Exploring Automation and Assurance Using Cisco DNA Centre (Self-study) Need for Digital Transformation Cisco Digital Network Architecture Cisco Intent-Based Networking Cisco DNA Centre Automation Overview Cisco DNA Centre Platform Overview Cisco DNA Centre Design Cisco DNA Centre Inventory Overview Cisco DNA Centre Configuration and Management Overview Onboarding of Network Devices Using Cisco DNA Centre Cisco DNA Centre Software Image Management Overview Cisco DNA Assurance Key Features and Use Cases Cisco DNA Centre Assurance Implementation Workflow Examining the Cisco SD-Access Solution (Self-study) Need for Cisco SD-Access Cisco SD Access Overview Cisco SD-Access Fabric Components Cisco SD-Access Fabric Control Plane Based on LISP Cisco SD-Access Fabric Control Plane Based on VXLAN Cisco SD-Access Fabric Control Plane Based on Cisco TrustSec Role of Cisco ISE and Cisco DNA Centre in SD-Access Cisco SD-Access Wireless Integration Traditional Campus Interoperating with Cisco SD-Access Understanding the Working Principles of the Cisco SD-WAN Solution (Self-study) Need for Software Defined Networking for WAN Cisco SD-WAN Components and Functions Cisco SD-WAN Orchestration Plane Cisco SD-WAN Management Plane- vManage Cisco SD-WAN Control Plane - vSmart Cisco SD-WAN Data Plane - WAN Edge Cisco SD-WAN Programmatic APIs Cisco SD-WAN Automation and Analytics Cisco SD-WAN Terminology Cisco IOS XE and IOS XE SD-WAN Software Flexible Controller Deployment Options Cisco SD-WAN Security Understanding the Basics of Python Programming Describe Python Concepts String Data Types Numbers Data Types Boolean Data Types Script Writing and Execution Analyse Code Introducing Network Programmability Protocols Configuration Management Evolution of Device Management and Programmability Data Encoding Formats Understanding JSON Model Driven Programmability Stack Introduction to YANG Types of YANG Models Understanding NETCONF Explain NETCONF and YANG REST Understanding RESTCONF Protocol Introducing APIs in Cisco DNA Centre and vManage (Self-study) Application Programming Interfaces REST API Response Codes and Results REST API Security Cisco DNA Centre APIs Cisco SD-WAN REST API Overview Labs Lab 1: Investigate the CAM Lab 2: Analyse Cisco Express Forwarding Lab 3: Troubleshoot VLAN and Trunk Issues Lab 4: Tuning STP and Configuring RSTP Lab 5: Configure Multiple Spanning Tree Protocol Lab 6: Troubleshoot EtherChannel Lab 7: Implementing Multiarea OSPF Lab 8: Implement OSPF Tuning Lab 9: Apply OSPF Optimization Lab 10: Implement OSPFv3 Lab 11: Configure and Verify Single-Homed EBGP Lab 12: Implementing HSRP Lab 13: Configure VRRP Lab 14: Implement NAT Lab 15: Configure and Verify VRF Lab 16: Configure and Verify a GRE Tunnel Lab 17: Configure Static VTI Point-to-Point Tunnels Lab 18: Configure Wireless Client Authentication in a Centralized Deployment (No Extended Access) Lab 19: Troubleshoot Wireless Client Connectivity Issues (No Extended Access) Lab 20: Configure Syslog Lab 21: Configure and Verify Flexible NetFlow Lab 22: Configuring Cisco IOS Embedded Event Manager (EEM) Lab 23: Troubleshoot Connectivity and Analyse Traffic with Ping, Traceroute and Debug Lab 24: Configure and Verify Cisco IP SLA's Lab 25: Configure Standard and Extended ACLs Lab 26: Configure Control Plane Policing Lab 27: Implement Local and Server-Based AAA (No Extended Access) Lab 28: Writing and Troubleshooting Python Scripts (No Extended Access) Lab 29: Explore JSON Objects and Scripts in Python (No Extended Access) Lab 30: Use NETCONF via SSH (No Extended Access) Lab 31: Use RESTCONF with Cisco IOS XE Software (No Extended Access) [-]

Kurset passer for deg som har brukt Focus Arealplan en stund og ønsker å kunne utnytte programmet enda bedre. Focus Arealplan er i stadig utvikling og har nå enda flere muligheter når den brukes sammen med AutoCAD Civil 3D og Autodesk InfraWorks. På dette kurset lærer du mer avansert bruk av programmet og hvordan du tar i bruk det som er nytt i programmet. Kursinnhold 2018 innholdsoversikt Tips til oppstart av plan (hva bør man ta spesielt hensyn til) Arbeidsmetodikk ved store planer (Feilsøking med Quick select, Mapclean, Dynamisk geometrikontroll) Planer med flere vertikalnivåer, arbeidsmetodikk Presentasjonstegninger, også ifm. flere vertikalnivåer 3D-funksjoner, inkludert terrengsnitt av plan, også med flere vertikalnivåer Viewframes (tegningsrammer). Spesielt nyttig for lange planer, veiplaner og vridde planer. (AutoCAD Civil 3D) Modifisering av arkstørrelse Standard pennoppsett Konvertering av hele Novapoint-planer til Focus-Arealplan-objekter. Konvertering av enkelt-objekter eller enkelt-lag fra Autocad- eller Civil 3D-tegninger Illustrasjonsverktøy InfraWorks Tips for kontroll av geometri Tips for ekstern kontroll av planen i SOSI-kontroll   [-]

  Fleksible kurs for fremtidenNy kunnskap skal gi umiddelbar effekt, og samtidig være holdbar og bærekraftig på lang sikt. NTI AS har 30 års erfaring innen kurs og kompetanseheving, og utdanner årlig rundt 10.000 personer i Nord Europa innen CAD, BIM, industri, design og konstruksjon.   Revit MEP MagiCAD VVS grunnkurs Her er et utvalg av temaene du vil lære på kurset Grunnleggende innføring i Revit Håndtering av Views, etasjer, manøvering i modell, visningsalternativer, redigeringsfunksjoner. Etablering av prosjekt. Linke modeller, sette opp etasjer og Views Prosjektering av ventilasjonsanlegg, varme- og forbruksvannsystem og avløpssystem IFC-eksport Utsparinger Etter kurset kan du bruke grunnleggende funksjoner i Autodesk Revit MEP og MagiCAD for Revit med fokus på å sette opp, importere og linke prosjekter, konstruere VVS-installasjoner, samt dokumentasjon. Lære å utforme en VVS-modell slik at mest mulig informasjon kan utnyttes med hensyn til BIM.   Dette er et populært kurs, meld deg på nå!   Tilpassete kurs for bedrifterVi vil at kundene våre skal være best på det de gjør - hele tiden.  Derfor tenker vi langsiktig om kompetanseutvikling og ser regelmessig kunnskapsløft som en naturlig del av en virksomhet. Vårt kurskonsept bygger på et moderne sett av ulike læringsmiljøer, som gjør det enkelt å finne riktig løsning uansett behov. Ta kontakt med oss på telefon 483 12 300, epost: salg@nticad.no eller les mer på www.nticad.no [-]

Excel Videregående [-]